subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

On-Car Service|Page 3134 > < MT Model|Page 3131
Page 1
background image

Brake Pedal Assy: Service and Repair
On-Car Service

BRAKE PEDAL 

1) Check position of pedal pad.

Pedal height: L

158 mm (6.22 in) 

If if is not in specified value, adjust it by adjusting brake booster operating rod length.

2) Check free play by operating pedal by hand.

If it is not in specified value, adjust it by adjusting position of stop light switch.

CAUTION:  Be careful not to rotate stop light switch.

Brake pedal tree play: A

1 - 3 mm (0.04-0.12 in) 
[Depress brake pedal pad with a force of less than 10 N (1 kg, 2 Ib.).]
 

3) Apply grease to operating rod connecting pin 10 prevent it from wearing.

CLUTCH PEDAL 

1) Check clutch pedal free play by operating pedal by hand.

Free play: L (At clutch pedal pad) 

10 - 20 mm (0.39- 0.79 in) 

2) If it is not in specified value, adjust it by turning adjusting nut on engine side end of clutch cable.

Free play: L

3 - 4 mm (0.12-0.16 in) 

On-Car Service|Page 3134 > < MT Model|Page 3131