Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
5) Remove boot together with large clips.
6) Straighten lock washer under ball joint.
CAUTION:
-
Be extremely careful not to hit surface of right hand rack; otherwise, oil leakage may result.
-
Tie-rod lock washer must be replaced with a new one whenever it is removed.
7) Loosen ball joint using ST and spanner and remove tie-rod from rack.
NOTE; When loosening ball joint, securely fix the rack using ST. ST 925700000 WRENCH
8) Loosen lock nut using ST, and remove adjusting screw. ST 926230000 SPANNER
9) Remove spring and sleeve.
10) Remove dust seal.
CAUTION: Be careful not to damage housing and input shaft, or to allow foreign matters to get inside when removing dust seal.
Inspection
