Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
Ball Joint: Service and Repair
Installation
INSTALLATION
1) Install ball joint onto housing.
Torque (Bolt):
49 Nm (5.0 kg-m, 36 ft-Ib.)
CAUTION: Do not apply grease to tapered portion of ball stud.
2) Connect ball joint to transverse link.
Torque (Castle nut):
39 Nm (4.0 kg-m, 29 ft-Ib.)
3) Retighten castle nut further within 60° until a slot in castle nut is aligned with the hole in ball stud end, then insert new cotter pin and bend it
around castle nut.
4) Install front wheels.
