Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
9) Loosen the coil spring carefully.
10) Using hexagon wrench to prevent strut rod from turning, tighten self-locking nut with ST.
Tightening torque:
49 +10/-0 Nm (5.0 +1.0/-0 kg-m, 36 +7/-0 ft-Ib.)
ST 927760000 STRUT MOUNT SOCKET
Installation
INSTALLATION
1) Install upper strut mount at upper side of strut to body and tighten with nuts.
Tightening torque:
20 ± 6 Nm (2.0 ± 0.6 kg-m, 14.5 ± 4.3 ft-Ib.)
2) Install A.B.S. sensor harness to strut. (A.B.S. equipped models)
Tightening torque:
152 ± 20 Nm (15.5 ± 2.0 kg-m, 112 ± 14 ft-Ib.)
3) Position aligning mark on camber adjustment bolt with aligning mark on lower side of strut.
CAUTION:
-
While holding head of adjusting bolt, tighten self-locking nut.
-
Be sure to use new self-locking nut.
Tightening torque:
152 ± 20 Nm (15.5 ± 2.0 kg-m, 112 ± 14 ft-Ib.)
4) Install brake hose at lower side of strut with clamp.
5) Install union bolts which secure brake caliper to brake hose.
Tightening torque:
18 ± 3 Nm (1.8 ± 0.3 kg-m, 13.0 ± 2.2 ft-Ib.)
CAUTION: Be sure to bleed air from brake system.
6) Install wheels.
NOTE: Check wheel alignment and adjust if necessary.
