Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
8. Set the axle below the lateral link bolt and reinstall the lateral link bolt.
Note: Inspect the axle for any deep scratches, pitting and damage to the dust shield. Replace if necessary.
9. Connect the slide hammer to the wheel-bearing hub. Do not use the original wheel lug nuts. Note: After threading on the 5 lug adapter to the slide
hammer, thread on the nut and tighten the adapter to the nut.
10. Carefully thrust the slide outward until the wheel bearing hub is removed.