Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
Clutch Cable: Service and Repair
REMOVAL
1) Disconnect clutch cable from release lever.
2) Remove clutch cable clamp from pedal bracket.
3) Disconnect clutch cable from pedal bracket and pedal end.
4) Remove clutch cable from body.
CAUTION: Before removing clutch cable from toe board, remove grommet. Slowly remove clutch cable, being careful not to scratch it.
INSTALLATION
1) Clean clutch pedal fitting hole, and apply grease. Connect clutch cable to clutch pedal.
2) Fit clutch pedal to pedal bolt, and connect clutch cable to bracket with clamp.
3) Connect clutch cable end to pedal end.
4) Connect clutch cable from release lever.
5) Install grommet to toe board.
6) Adjustment after cable installation.
