Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
2. Clean surface of glass to be adhered with alcohol or white gasoline.
6. Application of primer
1. Using a sponge, apply primer to part of glass to be adhered.
2. Apply primer to part of body to be adhered.
CAUTION:
-
Primer is hard to wipe off of body paint, instrument panel, Inner trim, etc. So put masking around these areas for protection.
-
After application, let 1st primer dry spontaneously for about 10 minutes.
-
Do not touch primer-coated surface under any circumstances.
7. Application of adhesive
1. Cut nozzle tip of cartridge as shown in figure.
2. Open cartridge and put it into a gun with nozzle attached.
3. Apply adhesive uniformly to all sides of adhesion surface while operating gun along glass end face.
8. Installation of glass
1. Hold glass with rubber suction cups.
2. Mount glass on body with matching pin aligned.
3. Stick them fast by pressing all sides lightly.
