Impreza GT F4-2.5L Turbo (2009)
Trim Panel: Service and Repair
Rear Quarter Trim
REAR QUARTER TRIM
REMOVAL
1. 5 DOOR MODEL
1. Remove the rear seat.
2. Remove the seat belt lower anchor bolt.
3. Remove the cap (B) on the upper side of the rear quarter pillar front trim, and remove the bolt inside.
NOTE: Remove the molding (A), and remove the cap from the backside of pillar trim not to damage the trim.
4. Remove the side belt cover (C).
5. Remove center belt cover (D), and remove the anchor bolt inside.
6. Remove the clips and screws, and remove the rear quarter upper trim.