Impreza GT F4-2.5L Turbo (2009)
3) Install the rocker cover onto cylinder heads. Ensure the gasket is properly positioned during installation.
4) Temporarily tighten the rocker cover tightening bolts in alphabetical order shown in the figure, and then tighten to specified torque in
alphabetical order.
Tightening torque:
6.4 Nm (0.7 kgf-m, 4.7 ft-lb)
13) Connect the PCV hose to the rocker cover.
NOTE:
Use a new clamp for the PCV hose clamp, fit the cut out in the ST with the protrusion on the clamp as shown in the figure, and lock the clamp.
ST 18353AA000 CLAMP PLIERS
14) Connect the connector to oil flow control solenoid valve.