Impreza GT F4-2.5L Turbo (2009)
14) Install the radiator upper brackets.
Tightening torque:
12 Nm (1.2 kgf-m, 8.9 ft-lb)
15) Install the intercooler. (Turbo model)
16) Install the air intake boot. (Turbo model)
17) Install the air intake chamber. (Non-turbo model)
18) Install the air intake duct.
19) Connect the connector to the mass air flow and intake air temperature sensor. (Non-turbo model)
20) Connect the ground cable to battery.
21) Refill the engine oil.
INSPECTION
Visually check that the oil pan, oil strainer and baffle plate are not damaged.
