Impreza GT F4-2.5L Turbo (2009)
INSTALLATION
CAUTION: If lubricant is spilt onto the exhaust pipe, wipe it off completely with cloth to avoid emission of smoke or causing a fire.
1. Before installing rear oxygen sensor, apply the anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal
easier.
CAUTION: Never apply anti-seize compound to the protector of rear oxygen sensor.
Anti-seize compound: NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent
2. Install the rear oxygen sensor.
3. Connect the connector to the rear oxygen sensor, and hold the rear oxygen sensor harness with the clip (A).
-
AT MODEL
-
MT MODEL