Impreza GT F4-2.5L Turbo (2009)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector (A).
3. Remove the nut (B) securing accelerator pedal assembly.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 18 N.m (1.8 kgf.m, 13.3 ft.lb)
DISASSEMBLY
NOTE: The accelerator pedal cannot be disassembled.