subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Return Line|Testing and Inspection|Page 2437 > < Fuel Return Line|Testing and Inspection|Page 2435
Page 2
background image

6. Remove the canister.
7. Remove the fuel tank.
8. Remove the fuel pipe assembly.
9. Disconnect the quick connector, then disconnect the fuel delivery tube, fuel return tube and jet pump tube.

1. Push the retainer in the direction of the arrow, disconnect the quick connector from pipe.

NOTE:  Clean the pipe and quick connector, if they are covered with dust.

2. To prevent from damaging or entering foreign matter, wrap the pipes and quick connectors with plastic bag etc.

10. Remove the evaporation pipe.

1. Remove the rear mud guard RH.
2. Remove the evaporation hose.

Fuel Return Line|Testing and Inspection|Page 2437 > < Fuel Return Line|Testing and Inspection|Page 2435