Impreza GT F4-2.5L Turbo (2009)
Wastegate Solenoid: Service and Repair
Wastegate Control Solenoid Valve
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector from the wastegate control solenoid valve (A).
3. Disconnect pressure hose (B) from the wastegate control solenoid valve.
4. Remove the wastegate control solenoid valve from the bracket
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 6.4 N.m (0.7 kgf.m, 4.7 ft.lb)