Impreza GT F4-2.5L Turbo (2009)
Starter Motor: Overhaul
Starter
DISASSEMBLY
1. Remove the nuts fastening the M terminal of the magnet switch assembly, and disconnect the cable from the M terminal.
2. Remove the screws fastening the magnet switch assembly, then remove the magnet switch assembly from the starter housing assembly.
3. Remove screws (A) of the brush holder assembly, and through bolts (B) on both sides, and remove the starter cover assembly.
4. Remove the brush holder assembly from the armature assembly.
NOTE: Hold the brush with your fingers so that the brush spring does not come flying out.
5. Remove the armature assembly and yoke assembly from the starter housing assembly together as a single unit.