subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Power Steering Line/Hose|Removal|Page 3930 > < Power Steering Fluid Reservoir|Removal|Page 3925
Page 1
background image

Power Steering Line/Hose: Service and Repair
Removal

Pipe Assembly

REMOVAL

1) Disconnect the ground cable from battery. 
2) Lift up the vehicle, and then remove the front crossmember support plate and jack-up plate.

 

^

Large type

^

Small type

3) Remove the one pipe joint at the center of the gearbox, and connect the vinyl hose to the pipe and the joint. Discharge the fluid by turning the

steering wheel fully clockwise and counterclockwise. Discharge the fluid similarly from other pipes.

4) Remove the clamp E from return hose and pressure hose.

Power Steering Line/Hose|Removal|Page 3930 > < Power Steering Fluid Reservoir|Removal|Page 3925