Impreza GT F4-2.5L Turbo (2009)
![background image](/subaru/impreza_gt/f4-2.5l_turbo/Page-1250003.png)
12) Using a drill, release the crimping of holder.
CAUTION:
Make a hole of 2 mm (0.08 in) depth using a drill with 3 mm (0.12 in) diameter.
13) Remove the holder.
14) Attach the ST to the pinion housing side of the rack, and push out the rack together with the outer side oil seal.
ST 34199FE000 INSTALLER & REMOVER
NOTE:
Block the pipe connection of steering body to prevent fluid from flowing out.