Impreza GT F4-2.5L Turbo (2009)
ST 34199FE000 INSTALLER & REMOVER
13) Using a press, press-fit until the mark on the ST is aligned with the end surface of the holder.
14) Remove the ST and holder.
15) Insert the outer side oil seal into the rack using the same procedure as steps 5) and 6).
ST 34199FE040 INSTALLER A, B, C
^
INSTALLER A: 34199FE070
^
INSTALLER B: 34199FE080
^
INSTALLER C: 34199FE090
16) Put the ST and pipe through the rack, and press-fit the outer side oil seal using a press.
ST 34199AG010 INSTALLER
17) Secure the gearbox in a vise using ST.
ST1 926200000 STAND
ST2 34199AG000 BOSS D
