Impreza GT F4-2.5L Turbo (2009)
Fluid Line/Hose: Service and Repair
Installation
INSTALLATION
1) Install the ATF inlet pipe and outlet pipe along with new washers.
Tightening torque:
T1: 25 N-m (2.5 kgf-m, 18.4 ft-lb)
T2: 40 N-m (4.1 kgf-m, 29.5 ft-lb)
T3: 45 N-m (4.6 kgf-m, 33.2 ft-lb)
2) Install the ATF cooler pipe to frame.
3) Connect the ATF cooler hose to the pipe on the transmission side.
NOTE:
^
Install so that the hose is not folded over, excessively bent or twisted.
^
Insert the hose to the specified position.