subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Clutch Switch > < Clutch Pedal Assembly|Diagrams|Page 3013
Page 6
background image

the master cylinder with a new part.

13) Push the release lever until the operating cylinder push rod retracts. Check that the clutch fluid level in the reservoir tank increases.

14) If the clutch fluid level increases, hydraulic clutch play is correct.
15) If the clutch fluid level does not increase or push rod does not retract, readjust the clutch pedal. 
16) Check the fluid level using the scale on the outside of the reservoir tank. If the level is below "MIN", fill fluid up to "MAX" level.

Recommended clutch fluid:

New FMVSS No. 116 DOT3 or DOT4 brake fluid

Clutch Switch > < Clutch Pedal Assembly|Diagrams|Page 3013