Impreza GT F4-2.5L Turbo (2009)
NOTE:
Observing from the main case hole, check that the lever spring is installed securely.
3) Hook the release bearing to the release lever, and fit the lever spring onto the raised portion of the pivot, while pushing the release lever to the
pivot and twisting it to both sides. (Turbo model)
NOTE:
Observing from the main case hole, check that the lever spring is installed securely.
4) Install the release bearing and fasten it with two clips. (Non-turbo model)
5) Install the dust cover.
6) Check the bearing for smooth movement by operating the release lever.
7) Install the transmission assembly.
INSPECTION
RELEASE BEARING
CAUTION:
Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.
1) Check the bearing for smooth movement by applying force to the bearing in the radial direction.
Radial direction stroke:
1.6 mm (0.063 in)