Impreza GT F4-2.5L Turbo (2009)
Windshield Washer Spray Nozzle: Testing and Inspection
Front Washer Nozzle
The Content of This Article / Image Reflects Manual Update # 18-36-09 Dated 01/11/09
Front Washer Nozzle
INSPECTION
1.
VISUAL CHECK
Check the following items, if a failure is found replace the parts.
-
Make sure the nozzle and hose are not clogged.
-
Make sure the hose is not bent.
2.
SPRAY POSITION CHECK
1. Turn the wiper switch to OFF position.
2. While the vehicle is at a standstill, make sure that the washer injection position is as shown in the figure.
3. After check, if the spray position is largely different from the position, replace with a new washer nozzle.
