subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Cooling System Inspection|Page 1354 > < Cooling System Inspection
Page 2
background image

Radiator cap valve open pressure
Standard value:

93 - 123 kPa
(0.95- 1.25 kg/sq.cm, 13.5-17.8 psi)

Service limit:

83 kPa (0.85 kg/sq.cm, 12.0 psi)

3. If the coolant temperature exceeds 76.0 to 80.0°C (169 to 176°F) while radiator is not so hot, check thermostat. If thermostat does not open at 

76.0 to 80.0°C (169 to 176°F), replace it with a new one.

4. If electric tan does not operate when coolant temperature exceeds 90 to 94°C (194 to 201°F), check thermoswitch or fan motor.

To prevent cooling system leaks, always add Genuine Subaru cooling system Conditioner (Part No. SOA635071) whenever the coolant is
replaced.

The content of this article/image reflects the changes called out by TSB - 18-74-04-mu.

Cooling System Inspection|Page 1354 > < Cooling System Inspection