subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Air Bleeding Procedure|Page 3397 > < Air Bleeding Procedure
Page 2
background image

While the engine is idling, depress the brake pedal with a 490 N (50 kg, 110 lbs.) load and measure the distance between the brake pedal and
steering wheel. With the brake pedal released, measure the distance between the pedal and steering wheel again. The difference between the two
measurements must be more than specified.
Specified pedal stroke: 90 mm (3.54 inch)
When depressing brake pedal with a 490 N (50 kg, 110 lbs.) load.
If the distance is more than specifications, there is a possibility that air is in the brake line. Bleed air from the brake line.

7. Add brake fluid to the required level (MAX. level) of reserve tank.
8. As a final step, test run the vehicle at low speed and apply brakes relatively hard 2 to 3 times to ensure that brakes provide normal braking action

on all four wheels without dragging and uneven braking.

Air Bleeding Procedure|Page 3397 > < Air Bleeding Procedure