subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Exhaust System > < Service Specifications|Page 1428
Page 3
background image

11. Remove left-hand belt cover No. 2.

12. Remove tensioner bracket. 
13. Disconnect heater hose from water pump. 
14. Remove water pump.

Water Pump Tightening Sequence

INSTALLATION 

Installation is in the reverse order of removal.

NOTES: 
-

Replace gasket with a new one.

-

When installing water pump, tighten bolts in two stages in numerical sequence as shown to 10 Nm (7.2 ft. lbs.).

Exhaust System > < Service Specifications|Page 1428