subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Lifter / Lash Adjuster, Valve|Description and Operation|Page 907 > < Lifter / Lash Adjuster, Valve|Description and Operation
Page 1
background image

Lifter / Lash Adjuster: Testing and Inspection

INSPECTION 

1) Disconnect blow-by hose from rocker cover. 
2) Remove spark plug cap.

3) Remove left and right rocker covers.

CAUTION:  Before removing left rocker cover, disconnect battery cables and generator cable.

4) Manually push valve rocker (at lash adjuster location) to check that there is no air in it.

NOTE:  When air is in lash adjuster, valve rocker moves when pushed with fingers.

5) If air is in lash adjuster, remove valve rocker assembly from engine and bleed air completely.

AIR BLEEDING 

1) Remove valve rocker assembly.

a) Remove bolts (1) through (4) in numerical sequence.

Lifter / Lash Adjuster, Valve|Description and Operation|Page 907 > < Lifter / Lash Adjuster, Valve|Description and Operation