Impreza L Sedan F4-2.2L SOHC (1997)
1. Loosen self-locking nut on inner side of rear lateral link.
CAUTION:
^
When loosening or tightening adjusting bolt, hold bolt head and turn self-locking nut.
^
Discard loosened self-locking nut and replace with a new one.
2. Turn adjusting bolt head until toe-in is at the specification.
NOTE: When left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by
approximately 3 mm (0.12 inch).
3. Tighten self-locking nut. Tightening torque: 98 ± 15 Nm (72 ± 11 ft.lbs.).
Steering Angle
Measurement
1. Place vehicle on a turning radius gauge.
2. While depressing brake pedal, turn steering wheel fully to the left and right. With steering wheel held at each fully turned position, measure both
the inner and outer wheel steering angle. Steering angle:
-
Inner wheel 37.4° ± 1.5°.
-
Outer wheel 32.5° ± 1.5°.
CAUTION:
^
Check toe-in.
^
Correct boot if it is twisted.
Adjustment