Impreza L Sedan F4-2.2L SOHC (1997)
Disconnect airbag connector (AB3) and (AB8) below steering column.
CAUTION: Do not reconnect airbag connector at steering column until airbag control module is securely re-installed.
4. Remove instrument panel console.
5. Disconnect 12-pin yellow connector (AB6) from airbag control module.
6. Using T30 TORX© bit (Tamper resistant type), remove four TORX© bolts in numerical sequence shown in figure. Discard the old TORX© bolts.
CAUTION: Use new TORX© bolts during re-assembly.
7. Installation is in the reverse order of removal.
CAUTION: Be sure to fully secure all airbag system connectors during re-assembly and confirm that all green double lock mechanisms are
engaged.