Impreza L Sedan F4-2.2L SOHC (1997)
Band: Adjustments
If the following abnormal shifting conditions are noted in a road test, the brake band must be adjusted.
1. Immobilize the end of the 10 mm-screw projecting on the left side of the transmission case, and loosen the nut with a double-end wrench.
In the case of occurrence of problems 2. and 3. mentioned previously, perform the adjustment by loosening or tightening the nut within a range of
3/4 turn from this state.
CAUTION: Do not loosen excessively; otherwise, the band strut on the servo piston will drop off.
2. In case of the occurrence of problems 1 and 4 mentioned previously, perform the adjustment as follows:
Adjusting procedure: Tighten adjust screw to 9 Nm (78 inch lbs.). torque, then back off three turns.
CAUTION: Do not tighten the adjusting screw with an excessively large torque.