Impreza L Sedan F4-2.2L SOHC (1997)
NOTE: Before measuring clearance, place the same thickness of shim on both sides to prevent retaining plate from tilting.
If the clearance is out of the specified range, select a proper retaining plate so that the standard clearance can be obtained.
Standard value: 0.45 - 0.85 mm (0.0177 - 0.0335 inch)
Allowable limit: 1.6 mm (0.063 inch)
8. Checking overrunning clutch clearance:
NOTE:
Before measuring clearance, place the same thickness of shim on both sides to prevent retaining plate from tilting.
If the clearance is out of the specified range, select a proper retaining plate so that the standard clearance can be obtained.
Standard value: 1.0 - 1.4 mm (0.039 - 0.055 inch)
Allowable limit: 2.0 mm (0.079 inch)
9. Install the needle bearing, and secure with the snap ring.
10. Install the one-way clutch (1-2) and plate, and secure with the snap ring.
NOTE: Set the inner race. Make sure that the forward clutch is free in the clockwise direction and locked in the counterclockwise direction, as
viewed from the front of the vehicle.