Impreza L Sedan F4-2.2L SOHC (1997)
Clutch Release Bearing: Service and Repair
REMOVAL
1. Remove release lever return spring (1).
2. Remove the two clips (2) from clutch release lever (3) and remove release bearing (6).
CAUTION: Be careful not to deform clips.
3. Remove release lever seal (4).
4. Remove release lever retainer spring from release lever pivot with a screwdriver by accessing it through clutch housing release lever hole. Then
remove release lever.
INSTALLATION
CAUTION:
Before or during assembling, lubricate the following points with a light coat of grease.
-
Inner groove of release bearing
-
Contact surface of lever and pivot
-
Contact surface of lever and bearing
-
Transmission main shaft spline (Use grease containing molybdenum disulphide.)