Impreza L Sedan F4-2.2L SOHC (1997)
4. Remove disc cover from housing.
5. Using a standard screwdriver, remove outer and inner oil seals.
CAUTION: Do not use old oil seals.
6. Using flat bladed screwdriver, remove snap ring.
7. Using ST1, support housing securely.
8. Using ST2, press inner race to drive out outer bearing.
CAUTION:
^
Do not remove outer race unless it is faulty.
^
Discard outer race after removal.
^
Do not replace inner or outer race separately; always replace as a unit.
9. Loosen bolts which secure tone wheel to hub. Remove tone wheel (only vehicle equipped with ABS).
10. Using ST and a hydraulic press, drive hub bolts out.
CAUTION: Be careful not to hammer hub bolts. This may deform hub.
INSPECTION
Check the removed parts for wear and damage. If defective, replace with a new one.
CAUTION:
^
If bearing is faulty, replace it as the bearing set.
