Impreza L Sedan F4-2.2L SOHC (1997)
6. Using pliers, install snap ring in its groove.
CAUTION: Make sure to install it firmly to groove.
7. Using ST1 and ST2, press outer oil seal until it contacts the bottom of housing.
8. Using ST1 and ST2, press inner oil seal until it contacts circlip.
9. Invert ST and housing.
10. Apply sufficient grease to oil seal lip. Specified grease SHELL 6459N.
CAUTION:
^
If specified grease is not available, remove bearing grease and apply Auto Rex A instead.
^
Do not mix different types of grease.
11. Install disc cover to housing the three bolts. Tightening torque: 14 ± 4 Nm (10.1 ± 2.9 ft. lbs.).
12. Attach hub to ST1 securely.
13. Clean dust or foreign particles from the polished surface of hub.
14. Using ST2, press bearing into hub by driving inner race.
15. Install knuckle. Refer to Steering and Suspension.
