subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Case, M/T|Service and Repair|Page 3024 > < Flywheel|Specifications|Page 3019
Page 1
background image

Case: Service and Repair

DISASSEMBLY

1. Drive out spring pin (1) with Special Tool (ST), and remove 5th shifter fork (2).

ST 398791700 Straight Pin Remover, or equivalent.

2. Remove plugs (3), springs (4) and checking balls (5).

3. Drive out spring pin (6), and pull out 3-4 fork rod (7) and shifter fork (8).

NOTE:  When removing rod, keep other rods in neutral. Also, when pulling out straight pin, remove it toward inside of case so that it may not hit
against case.

Case, M/T|Service and Repair|Page 3024 > < Flywheel|Specifications|Page 3019