Impreza L Sport Wagon F4-2.2L SOHC (1999)
Air Bag(s) Arming and Disarming: Service Precautions
CAUTION:
The airbag module must not be disassembled. The airbag module cannot be used again once inflated.
When removing and installing the airbag module, the operator should stand, as much as possible, on the side of the airbag module.
After removal, the airbag module should be kept away from heat and light sources, and stored on a clean, flat surface to prevent from any damage to its
lower structure.
Do not check airbag module continuity with airbag removed from the vehicle body.
Replace airbag module with a new one, should any of the following conditions develop:
- Pad surface is scratched or cracked.
- Connector harness is damaged.
- Inflator side structure of module is cracked or deformed.
- Module is excessively stained with water, oil, etc.
- Module was accidentally dropped.
- The front seat assembly is damaged or deformed.
