subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Replacement|Page 3779 > < Replacement
Page 2
background image

^

In accordance with the following table, check all removed parts for wear and damage, and make repair or replacement if necessary.

Service Limit 
Make a measurement as follows. If it exceeds the specified service limit, replace the parts with new ones.

CAUTION: 
^

Fix oil pump on a vise to make a measurement. At this time, hold oil pump with the least possible force between two wood pieces.

^

Do not set outside of flow control valve or pulley on a vise; otherwise outside or pulley might be deformed. Select properly sized wood pieces.

^

Play of pulley shaft

On condition:

P: 9.8 N (1.0 kg, 2.2 lb.) 

Service limit:

Radial play (Direction <-->) 0.4 mm (0.016 inch) or less 

Axial play (Direction <-->)

0.9 mm (0.035 in) or less 

^

Ditch deflection of pulley

Replacement|Page 3779 > < Replacement