subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Front Seat|Page 4793 > < Front Seat
Page 2
background image

2. Pull reclining lever back to fold backrest all the way forward. While pulling slide adjuster lever, move seat all the way forward.
3. Remove bolt cover at rear end of slide rail.
4. Remove bolts securing seat rear.

5. While pulling slide adjuster lever, slide seat all the way back.
6. Remove bolts securing front of seat.

7. Remove front seat from vehicle.

CAUTION:  Be careful not to scratch seat when removing it from vehicle.

INSTALLATION

1. While operating button (located on top of backrest), lift headrest out by placing your hand between backrest and headrest.

2. Pull reclining lever back to fold backrest all the way forward. Pull slide adjuster lever and move lower slide rail all the way backward.
3. Position seat in compartment and align the holes on the seat with the holes on the car body side.
4. Secure the front of seat using inward and outward bolts (A) and (B) in that order.

Front Seat|Page 4793 > < Front Seat