Impreza L Sport Wagon AWD F4-2.2L SOHC (2001)
![background image](/subaru/impreza_l_sport_wagon_awd/f4-2.2l_sohc/Page-894001.png)
Brake Pad: Service and Repair
Front
REMOVAL
1. Remove lock pin.
2. Raise caliper body.
3. Remove pad.
NOTE: If brake pad is difficult to remove, proceed as follows:
1. Remove caliper body and fasten it provisionally to coil spring.
2. Remove support.
3. Place a support in a vise between wooden blocks.
4. Attach a rod of less than 12 mm (0.47 inch) diameter to the shaded area of brake pad, and strike the rod with a hammer to drive brake pad out
of place.
INSTALLATION
1. Apply thin coat of Molykote AS880N (Part No. 26298AC000) to the frictional portion between pad and pad clip.