subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Brake Fluid Level Sensor/Switch > < Brake Fluid|Specifications|Page 3709
Page 2
background image

11. Depress brake pedal with a force of approximately 294 N (30 kgf, 66 lbs.) and hold it there for approximately 20 seconds. At this time check

pedal to see if it shows any unusual movement. Visually inspect bleeder screws and brake pipe joints to make sure that there is no fluid leakage.

12. Install wheels, and drive car for a short distance between 2 to 3 km (1 to 2 miles) to make sure that brakes are operating properly.

Brake Fluid Level Sensor/Switch > < Brake Fluid|Specifications|Page 3709