Impreza L Sport Wagon AWD F4-2.2L SOHC (2001)
3. Tighten bolts (a) through (d) to specified torque.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
2. Adjust the valve clearances.
3. Install rocker cover and connect PCV hose.
C: DISASSEMBLY
1. Remove bolts which secure rocker shaft.
2. Extract rocker shaft. Remove valve rocker arms, springs, plates and shaft supports from rocker shaft.
CAUTION: Arrange all removed parts in order so that they can be installed in their original positions.
3. Remove nut and adjuster screw from valve rocker.
D: ASSEMBLY
1. Install adjuster screw and nut to valve rocker.
2. Arrange valve rocker arms, springs and shaft supports in assembly order and insert valve rocker shaft.
Tightening torque (Shaft supports installing bolts): 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
CAUTION: Valve rocker arms, rocker shaft and shaft supports have identification marks. Ensure parts with same markings are properly
assembled.
3. Install valve rocker shaft securing bolts.
E: INSPECTION
1. VALVE ROCKER ARM
1 of 2