subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Condenser HVAC|Testing and Inspection|Page 4276 > < Condenser HVAC|Testing and Inspection
Page 1
background image

Condenser HVAC: Service and Repair

Condenser

REMOVAL

1. Disconnect battery negative terminal.
2. Discharge refrigerant using refrigerant recovery system. <Ref. to OPERATION, Refrigerant Recovery Procedure.>

3. Remove front grille.
4. Remove the radiator bracket.

5. Disconnect high-pressure hose (A) and high-pressure pipe (B) from condenser.

6. Remove the two bolts which secure condenser. While lifting condenser, remove it through space between radiator and radiator panel.

INSTALLATION

1. The condenser should be installed in the reverse order in which it was removed. When installing the condenser, pay attention to the following:

CAUTION:  Before connecting the pipe, be sure to apply oil to the periphery of O-ring.

Condenser HVAC|Testing and Inspection|Page 4276 > < Condenser HVAC|Testing and Inspection