Impreza L Sport Wagon AWD F4-2.2L SOHC (2001)
Accelerator Pedal: Service and Repair
A: REMOVAL
1. Disconnect ground cable from battery.
2. Disconnect accelerator cable from throttle body.
CAUTION: Be careful not to kink accelerator cable.
3. Remove instrument panel lower cover from instrument panel, and connector.
4. Disconnect accelerator cable from accelerator pedal lever.
5. Working inside engine compartment, remove casing cap out of the toe board by turning it clock-wise.
6. Pull out the cable from the toe board hole.
7. Remove accelerator pedal connecting bolt from accelerator pedal bracket.
B: INSTALLATION
1. Install in the reverse order of removal.