subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Suspension > < Steering Shaft|Testing and Inspection
Page 1
background image

Steering Wheel: Testing and Inspection

INSPECTION

If the vehicle equipped with an SRS airbag system is damaged in a collision, the airbag system parts must be checked and replaced in accordance with
the following standards:

-

After faulty parts are replaced, the warning light operation must be checked.

-

When the ignition switch is turned ON, it lights up for 8 seconds and then it goes out for at least 30 seconds.

-

The trouble code stored in memory must be erased after the check.

STEERING WHEEL

INSPECTION STANDARD

-

A vehicle damaged in a collision (regardless of whether or not airbag is deployed).

REPLACEMENT STANDARD

-

Check steering wheel insert for cracks or deformities.

-

Check to ensure that new airbag module is properly installed in steering wheel

-

After installing airbag module, check to ensure that it is free of interference with steering wheel and that clearance between the two is equal at all
points.

Suspension > < Steering Shaft|Testing and Inspection