subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shifter A/T|Removal and Installation|Page 2947 > < Initial Inspection and Diagnostic Overview|Page 2944
Page 1
background image

Shifter A/T: Service and Repair
Removal and Installation

A: REMOVAL 

1. Remove the cable.

1. Prior to removal, set lever to "N" position.

2. Remove front exhaust pipe.
3. Separate cable from transmission lever.

4. Remove clamp from transmission case.

5. Disconnect cable from select lever and then remove cable bracket.

2. Remove console box.

3. Disconnect the connectors, then remove the six screws to take out the select lever assembly from the body.

B: INSTALLATION 

1. Mount the select lever onto the vehicle body.

Shifter A/T|Removal and Installation|Page 2947 > < Initial Inspection and Diagnostic Overview|Page 2944