Impreza L Sport Wagon AWD F4-2.2L SOHC (2001)
9. Remove oil seal using ST.
ST 398527700 PULLER ASSY
10. Fit a new oil seal using ST.
ST 498447120 OIL SEAL INSTALLER
11. Install companion flange.
12. Tighten self-locking nut within the specified torque range so that the turning resistance of companion flange becomes the same as that before
replacing oil seal.
CAUTION: Use a new self-locking nut.
ST 498427200 FLANGE WRENCH
Tightening torque: 181 Nm (18.5 kgf-m, 134 ft. lbs.)
13. Reassembling procedure hereafter is the reverse of the disassembling.
VA-Type
2. VA-TYPE
1. Disconnect ground terminal from battery.
2. Move selector lever or gear shift lever to "N".
3. Release the parking brake.
4. Remove oil drain plug, and drain gear oil.
5. Jack-up rear wheels and support the vehicle body with sturdy racks.