Impreza L Sport Wagon AWD F4-2.2L SOHC (2001)
1. Install the pitching stopper.
Tightening torque:
T1: 49 Nm (5.0 kgf-m, 36.2 ft. lbs.)
T2: 57 Nm (5.8 kgf-m, 42 ft. lbs.)
2. Install the air intake duct and air cleaner case.
2. CROSSMEMBER AND CUSHION RUBBER
1. Install the rear cushion rubber.
Tightening torque: 34 Nm (3.5 kgf-m, 25.3 ft. lbs.)
2. Install the crossmember.
Tightening torque:
T1: 69 Nm (7.0 kgf-m, 51 ft. lbs.)
T2: 137 Nm (14 kgf-m, 101 ft. lbs.)
3. Remove the transmission jack.
4. Install the heat shield cover.
5. Install the center exhaust pipe, rear exhaust pipe and the muffler.