Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Power Steering Fluid Reservoir: Service and Repair
A: REMOVAL
1. NON-TURBO MODEL
1. Remove the air intake duct.
2. Drain the fluid from the reservoir tank.
3. Disconnect the pipe D from the return hose and suction hose from the oil pump.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
4. Remove the reservoir tank from the bracket by pulling it upwards.
2. TURBO MODEL
1. Remove the air intake duct.
2. Drain the fluid from the reservoir tank.
3. Disconnect the return hose and suction hose from the reservoir tank.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose, cover the open ends of them with a clean cloth.
4. Remove the reservoir tank from the bracket by pulling it upwards.
B: INSTALLATION
1. NON-TURBO MODEL
1. Install the reservoir tank to the bracket.