Impreza Outback Sport AWD F4-2.5L SOHC (2002)
5. Pass the piano wire through the hole, and attach securely both the wire ends to pieces of wood.
6. Pull the wire ends alternately to cut off the adhesive layer.
CAUTION
-
Do not tightly pull the piano wire against the windshield glass edge.
-
Be careful not to damage interior and exterior parts.
-
When removal is made with area close to instrument panel, place a protection plate over it.
-
Pay particular attention to the removal.
-
Do not cross piano wires. Otherwise they may be cut.
INSTALLATION
1. Clean the external circumference of windshield glass with alcohol or white gasoline.
2. Remove the adhesive layer on the body using cutter knife to obtain smooth face 2 mm (0.08 in) thick.
CAUTION: Be careful not to damage the body and paint surface.
3. Clean the body with alcohol or white gasoline to remove thoroughly chips, dusts, and dirts from the body face.
4. Place the glass on body.
5. Adjust the glass position to make uniform clearance between body and glass in four corners.
6. Bond the matching pins and dam rubber.
