Impreza RS Coupe AWD F4-2.5L DOHC (1998)
1. Clean all parts before assembly.
2. Apply grease [NIGTIGHT LYW No. 2 or equivalent] to each parts.
3. Assembly is in the reverse order of disassembly.
4. After completion of fitting, transfer selector lever to range "P" - "1", pressing the button of the grip; then check whether the indicator and selector
lever agree, whether the pointer and position mark agree and what the operating force is.
E: INSTALLATION
1. Mount the selector lever onto the vehicle body.
2. Tighten the six bolts to install the selector lever to the vehicle body, then connect connectors.
Tightening torque:
5.9 ± 1.5 Nm (0.6 ± 0.15 kg-m, 4.3 ± 1.1 ft. lbs.)
3. Install console box.
4. Set location of selector lever at "N" position.
5. Set location of selector arm installed on the transmission body at "N" position.
6. Pass inner cable through selector arm pin and then connect it using a washer and snap pin.
7. Attach outer cable to plate on transmission case with the bolts.
Tightening torque:
14 ± 4 Nm (1.4 ± 0.4 kg-m, 10.1 ± 2.9 ft. lbs.)
