Impreza RS Coupe AWD F4-2.5L SOHC (1999)
Throttle Cable/Linkage: Service and Repair
A: REMOVAL
1. Disconnect accelerator cable from connector inside engine compartment first.
2. Remove lock nut from accelerator cable bracket.
3. Separate accelerator cable from bracket, then unlock inner cable.
4. Remove cable end from throttle cam using your fingertips.
CAUTION: Be careful not to bend inner cable.
5. Disconnect cable end from accelerator cable bracket inside driver compartment.
6. Remove clip inside engine compartment.
7. Working inside engine compartment, remove cable connection by turning toe board clockwise.
8. Pull out the cable from the toe board hole.